MobileMapper 300

The MobileMapper 300 is a smart antenna designed to be used in combination with a wide variety of mobile devices, including smart phones, tablets, and notebook computers. The MobileMapper 300 solution is compatible with Android mobile devices and is ready to work with any GIS applications.

Enquiry Now

The MobileMapper 300 is a smart antenna designed to be used in combination with a wide variety of mobile devices, including smart phones, tablets, and notebook computers. The MobileMapper 300 solution is compatible with Android mobile devices and is ready to work with any GIS application. When MobileMapper 300 is synchronised with a specific mobile device, this device and the application running on it (could be Trimble or any third party application) will benefit from the position provided by the MobileMapper 300 with accuracies much greater than those from the internal GPS.

The MobileMapper 300 solution, offers to GIS users the ability to use their preferred GIS application and run it on their preferred mobile device, whatever it is, and still benefit from the best of Spectra Precision GNSS technology. To facilitate the integration of a professional GNSS receiver with those mobile devices and the Android  world, the MobileMapper 300 solution includes a control application which manages all the communication and GNSS settings: SPace (Spectra Precision accuracy enabler). With MobileMapper 300, consumer devices are no longer limited by their internal GPS and can attain mapping grade or even survey grade accuracy levels. The SPace application also facilitates integration with third party GIS applications limiting the need for any integration or development efforts.

Features & Benefits

      Accuracy on many mobile devices
      Compatible with Android
      Straight forward integration with any GIS application
      Scalable from mapping grade to full RTK accuracy
      Compact, light weight and configuration-free GNSS receiver
      SPace control application for all required GNSS settings (available shortly on Google Play, free of charge)

Specifications

General 
     • Three accuracy levels available from mapping grade to RTK
     • Ready to use solution for Android devices
     • 220 channels receiver L1/L2 GPS/ GLONASS
     • Configuration-free, very light weight and compact
GNSS Characteristics 
     • 220 GNSS channels – GPS L1C/A, L2P and L2C – GLONASS L1C/A and L2C/A – SBAS: code and carrier (WAAS/EGNOS/ MSAS/GAGAN)
     • Very low noise GNSS carrier phase measurements
     • Proven low elevation tracking technology
     • Supported data formats: RTCM 2.0, 2.1, 2.3, 3.0 and 3.1, CMR, CMR+
     • RTK networks: VRS, FKP, MAC 
Real-Time Accuracy (RMS)
SBAS (WAAS/EGNOS/MSAS/GAGAN)
     • Horizontal < 50 cm (1.64 ft)
     • Vertical < 85 cm (2.79 ft) 
Advanced accuracy modes (need correction service) 
     • 30/30
          – Horizontal 30 cm
          – Vertical 30 cm
     • 7/2 (Firmware option needed)
          – Horizontal 7 cm
          – Vertical 2 cm
     • Full RTK (Firmware option needed)
          – Horizontal 10 mm + 1ppm
          – Vertical 20 mm + 1 ppm
     • RangePoint RTX (subscription required)
          – Horizontal 50 cm in < 5 min
Real-Time Performance 
     •  Initialisation Time
     •  Initialisation Reliability
Typically < 10 sec (for baselines < 20 km)
> 99.9%
Post-Processing Accuracy (RMS)
Static, Rapid Static 
     • Horizontal 5 mm (0.016 ft) + 0.5 ppm
     • Vertical 10 mm (0.033 ft) + 0.5 ppm 
High-Precision Static
     • Horizontal 3 mm (0.009 ft) + 0.5 ppm
     • Vertical 6 mm (0.019 ft) + 0.5 ppm 
Post-Processed Kinematic 
     • Horizontal 10 mm (0.033 ft) + 1 ppm
     • Vertical 20 mm (0.065 ft) + 1 ppm
Data Logging Characteristics 
Recording Interval  1 – 60 seconds 
Physical Characteristics  
Size Unit – 20.5 x 20.5 x 6.2 cm (8.1 x 8.1 x 2.4 in)
Weight GNSS Receiver: 650 g (1.4 lb)
I/O Interface
     • 9-16 V DC input power
     • RS232 serial link
     • Bluetooth 2.0 class 2 (SPP profile)
Memory 
     • 6 MB internal memory (expandable through data collector memory)
     • Up to 100 hours of 15 sec. raw GNSS data from 18 satellites 
Operation 
     • RTK network rover: VRS, FKP, MAC
     • NTRIP, Direct IP, RangePoint RTX over IP
Environmental Characteristics
     • Operating temperature: -30° to +65°C (-22° to +149°F)
     • Storage temperature: -40° to +70°C (-40° to +158°F)
     • Humidity: 100% condensing
     • IP67 waterproof, sealed against sand and dust
     • Shock: ETS300 019
     • Drop: 2 m pole drop on concrete
Power Characteristics
     • Li-Ion battery, 5000 mAh
     • Battery life time: 10 hrs
     • Nominal voltage: 3.7 V
     • External DC power: 9-16 V with reverse polarity protection (ISO 7637)
Standard System Components
     • MobileMapper 300 receiver
     • Power cable
     • AC/DC adapter
     • CLA adapter
     • Soft bag
Optional System Components
     • RS232 to USB adapter kit
     • Field brackets for 7″ and 10″ tablets

Application
MobileMapper 300 is delivered with SPace utility for easy configuration and straight forward integration with third party GIS application. SPace is available for free on Google Play
SPace Main Functionality
     • Compatible with Android (version 4.2 or higher) platforms
     • Bluetooth connection between MobileMapper 300 and third party device
     • Correction service setup
     • Position quality details
     • Satellite sky plot
     • Make accurate position available to any 3rd party application

Downloads

Brochure
Download the MobileMapper 300 Brochure here

User Guides
MobileMapper 300 User manual Rev A
User guide – MobileMapper 300

Updates
WinFlash Client
Firmware Option loading procedure with WinFlash Client
SpectraPrecision Loader tool V1.3.4
SpectraPrecision loader instructions
MobileMapper 300 v5.0 Release Notes
MobileMapper 300 v5.0 FW